FAQs Hints Tips
Welcome to BarrelsTotesDelivered.com
How do I make an order? Orders are made securely through the website. Our payment engine is PayPal no PayPal account needed.
What is the cost of delivery?
Delivery cost is free to $24 per item not per quantity of the item.
Delivery cost is shown in the shopping cart.
What is the cost of delivery for a 330 Gallon Tote? Free Delivery for all 330 Gallon totes to NC, SC, & VA.
What is the delivery time? Estimated delivery time is 3-15 days. Delivery time can be longer depending on area and delivery companies availability.
What are the measurements of a 55 gallon barrel? The measurements of a 55 gallon barrel, either plastic or metal, are approximately 3 feet long by 2 feet wide.
What are the measurements of a 275 gallon tote? The measurements of a 275 gallon tote are approximately 48 inches long by 40 inches wide by 46 inches high.
What are the measurements of a 330 gallon tote? The measurements of a 330 gallon tote are approximately 48 inches long by 40 inches wide by 53 inches high.
Is there a minimum order amount? Minimum purchase order of $200 applies to certain states, cities, and surrounding areas. Please feel free to contact us with any questions about your area: contact us page, text, or call
What is a Rain Barrel?
A rain barrel is a container that collects runoff from your home’s gutter system, connecting to the downspout with a rain diverter or fitting under a modified downspout. A spigot/faucet or hose connector lets you drain the water for use around your landscape. Rain barrels provide an alternative to using municipal water or well water for irrigation. Plants benefit from water that’s free of the chemicals and minerals in tap water. Rain barrels can reduce the volume of runoff entering the storm sewer, keeping pesticides, fertilizer and other chemicals out of nearby bodies of water. Rainwater collection for use later also keeps it from entering your foundation, crawl space or basement. Some cities offer financial incentives for using rainwater for irrigation as a supplement to municipal water.
How do I install a Rain Barrel?
The simplest method is to shorten a downspout from your gutter and divert the water into the top as shown above. A flexible elbow can readily be used if the distance or angle requires it.
Installing a Rain Barrel more complex method.
Plan to install the barrel at a downspout near where you need the water. A rain barrel supplies low-pressure water, and the flow rate decreases as the barrel empties. Elevating the barrel improves the flow rate.
STEP 1
Determine which gutter downspout you’ll use with the barrel.
STEP 2
Prepare the area where the barrel will rest. If you’re placing it on the ground rather than a patio or concrete pad, dig the area out to a depth of one or two inches and use gravel, sand or pavers to create a stable, level surface. Set up a sturdy stand or platform if you plan to elevate your barrel.
STEP 3
If you elevate the barrel above the ground the structure you use must be able to support the weight of a full barrel. A gallon of water weighs about 8.3 pounds. So, if a 40-gallon barrel weighs 30 pounds empty, it will weigh over 360 pounds when full.
STEP 4
Place the barrel next to the downspout at its final, installed height.
STEP 5
Configure the downspout to direct water into the barrel. Before cutting or boring into a downspout, make sure there are no heating or other electrical cables running through it. Measure and mark carefully. Follow your manual’s instructions to adapt the downspout. Methods include:*Cutting the downspout to allow the barrel to fit under it and attaching an elbow section, if needed*Boring or cutting out a section of downspout and installing a diverter that connects to the barrel with a hose*Replacing part of the downspout with a customized section or flexible downspout extension that will fill the barrel*Wear work gloves and eye protection when cutting or boring into the downspout.*Protect your home’s exterior while cutting or boring into the downspout by placing a piece of plywood behind the downspout.
STEP 6
Position and level the barrel.
STEP 7
Direct the barrel’s overflow to keep water away from the foundation of your home. You may place a hose on the brass overflow valve (as seen above), or you may need to place a gutter splash block under the overflow outlet.
